Bright Bar

Product Details:

Stainless Steel Flat Bars is a corrosion-resistant iron which is easy to maintain and widely used in both commercial and industrial equipment. It enjoys diverse styles and top grade quality. Stainless Steel Flat Bars are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. And quality information.

Product Details:

Product Details:

• Supply Condition: Cold Drawn & Polished Cold Drawn Centreless Ground & Polished
• Application: Machined Components, Pumps Shafts Valves, Fasteners, Machine Tools Dairy Equipment Surgicals & Medicals Ports Threaded Bars, Studs, Bolts, Pins, Hinges and Handles

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

Product Details:

Product Details:

Product Details:

Product Details:

OHNS steel is a general purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength and wear resistance. Chemical composition of OHNS is Carbon 0.94%, Manganese 1.2%, Silicon 0.30%, Chromium 0.50% and Vanadium 0.15%.

Din 2379 Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance 12 % ledeburitic chromium steel. It can be nitrided after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

Steel Properties

DIN 2379 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition.DIN 2379 is the superior steels than D3 due to high alloys properties.

OHNS ROUND BAR STANDARDS / EQUIVALENT GRADES OHNS LOW SPEED STEEL ROUND BAR MECHANICAL PROPERTIESOHNS O1 cold work steel is an equivalent of DIN 2510. The grade AISI O1 tool steel is an oil-hardening, non-shrinking tool steel and has a good cutting edge retention, high hardenability and dimensional stability during heat treatment.OHNS HIGH STEEL ROUND BAR CHEMICAL COMPOSITION

CHEMICAL COMPOSITION (Typical Analysis in %)

PHYSICAL PROPERTIES

HEAT TREATMENT

 

CONDITIONS OF OHNS STEEL FLAT BAR AND ROUND BAR

Product Details:

Riton Metal Industries is 17-4 PH Stainless Steel Manufacturers & Suppliers. 17-4 PH Stainless Steel is a martensitic, chromium nickel copper precipitation hardening stainless steel. 17-4 PH Steel is capable of attaining wide range of strength & toughness properties depending on the precipitation or aging temperature used in hardening. 17-4 PH Stainless Steel is available in 17-4 PH Stainless Steel Sheet, 17-4 PH Stainless Steel Plates, 17-4 PH Stainless Steel Tubes, 17-4 PH Stainless Steel Pipes, 17-4 PH Stainless Steel Bars, 17-4 PH Stainless Steel Flanges, 17-4 PH Stainless Steel Fittings etc.

Quality–

Our team believes that the quality of the round bar is very important because these bars also have many applications in various industries. Best quality raw material gives long-lasting performance to bars without any damage during operating conditions. We hire the most experienced persons which have sound knowledge to make round bar a very useful products as it has high demand in the market. Our company also provided advance training for our new worker which makes our round bar a very advance quality product of the market. We train our workers and hire experts to check the quality of the round bar. We use many things to check the quality such as actual measurement as per standard, analysis of all elements as per standard, resting as various standards like measurement of width, thickness, and recording visual inspection.

Testing-
Our company applies many tests to analyze the properties of our round bar. After the testing report is positive then we sell this bar on the market. It also helps to know the strength and weakness of the round bar.
• Hydrostatic testing
• Micro and macro testing
• Impact testing
• Chemical testing
• Bars are also going through high pressure and temperature

Stock Size Range and Specifications For Stainless Steel 17-4PH Round Bar

Specification : ASTM A564 / ASME SA564

Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI

Round Bars : Outside Diameter in the range of 4mm to 500mm

Bright Bars : Outside Diameter in the range of 4mm to 100mm

Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)

Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)

Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Length : 1 to 6 Meters, Custom Cut Lengths

Form : Round, Square, Hex (A/F), Rectangle Etc.
Chemical Composition of Stainless Steel 17-4PH Bars

 

Mechanical Properties of SS 17-4PH / UNS S17400 / 1.4542 / SUS 17-4PH Round Bar

 

Stainless Steel 17-4PH Bars Application Industries  Petrochemical Industry, Chemical Industry, Oil and Gas Industry, Pulp & Paper Industry,    Power Plant Industry, Food Processing Industry, Pharmaceuticals Industry, Energy Industry   Aerospace Industry

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

Product Details:

Our range of Stainless Steel Square Bars is manufactured using quality material to ensure high tensile strength, durable finish and high corrosion resistance. Available in various specifications, these meet the demands of food industry, steel furniture, nuts & bolts and Alan key. We market these at competitive prices.

Application: 

• Machined Components, Pumps Shafts Valves, Fasteners, Machine Tools Dairy Equipment Surgicals & Medicals Ports Threaded Bars, Studs, Bolts, Pins, Hinges and Handles.

Product Details:

Product Details: