Product Details:
Minimum Order Quantity | 1 Kg |
Grade | Duplex 2205 - UNS S32205 |
Size | Diameter: 3mm - 450mm DIA |
Shape | ROUND BAR,SQUARE BAR, HEXAGONAL, FLLAT, CIRCLE |
Brand | Riton Metal |
Single Piece Length | 3 meter, 3 to 6 meter, Custom Cut Lengths, 6 meter |
Application | Manufacturing |
Unit Length | 3 to 6 meter, Custom Cut Lengths |
Usage/Application | Industrial |
Type | ASTM A276 UNS S32205, 2205 Duplex Stainless Steel |
Technique | Hot Rolled |
Test Certificate | We issue EN10204/3.1 Certificate |
Surface Finish | EXPORT BRIGHT BAR , BLACK BAR |
Material | Stainless Steel |
High Temperature Strength | Solution Annealing, Soft Annealing, Hardening & Tempering & Normalizing, Oil & Water Quenching. |
Tolerance | H13K9, K10, K11, K12, H12, H10, H8, H11, H9 or as per clients' requirements |
Diameter | Diameter: 3mm - 450mm DIA |
Standard | ASTM, EN, JIS, ASME DIN, AISI, API, BS Round Bars |
Country of Origin | Made in India |
Grade | Duplex 2205 – UNS S32205 |
---|---|
Specification | ASTM A276 UNS S32205, 2205 Duplex Stainless Steel |
Standard | ASTM, EN, JIS, ASME DIN, AISI, API, BS Round Bars |
Length | 3 to 6 meter, Custom Cut Lengths |
Round bars size | Diameter: 3mm - 450mm DIA |
Flat bar size | Thickness: 2mm~100mm |
Width: 10mm~500mm | |
Square bar size | 4mm*4mm~100mm*100mm |
Angle bar size | 3mm* 20mm* 20mm~12mm* 100mm* 100mm |
Hex Bar size | 2mm~100mm |
Rectangles Size | 33mm x 30mm to 295mm x 1066mm |
Billet Size | 1/2" to 495mm Diameter |
Finish | Grinding, Turned, Black, Rough Polish, NO.4 Finish, Centreless Ground, Bright Polished,Matt Finish & BA Finish |
Tolerance | H13K9, K10, K11, K12, H12, H10, H8, H11, H9 or as per clients’ requirements |
Surface |
|
Condition | Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar, Sheared & Edged, Rolled Flat |
Technique | Duplex 2205 Cold Rolled, Hot Rolled, Forged Round Bar, Cold Drawn, Rod |
Form | Half Round,Round, Hex (A/F), Triangle, Rectangle, Rod, Precision Ground Bar, Square, Profiles, Forging, Round Rod, Hollow, Rings, Blocks, Billet, Ingot, Threaded, T-Bar, Half Round Bar, Flat Bar, Channel Bar, I/H Bar, Angle Etc. |
Manufacturing Process |
|
Heat Treatment |
|
Quality & Inspection |
|
Features |
|
Tolerances | according to EN 10278 - ISO 286-2 |
Our Duplex 2205 round bar stockyad in India | Coimbatore, Thiruvananthapuram, Chennai, Noida, Bhubaneswar, Agra, Pune, Dhanbad, Bengaluru, Shivamogga, Hyderabad, Tirunelveli, Mumbai, Tiruchirappalli, Ahmedabad, Gujarat, Navi Mumbai, Pimpri-Chinchwad, |
Certificates | EN 10204 / 3.1 |
Our Duplex 2205 round bar conforms to NACE MR0175/ISO 15156 |
Additional Information:
Product Details:
Material Grade | H13 |
Usage/Application | Manufacturing |
Shape | Round |
Diameter | Dimensions: 25-210 x 65-510 , 10mm - 410mm |
Material | Grade: D3, 1.2080, D2, 1.2379, H13, 1.2344, H11, EN31 , 52100, OHNS , 1.2510 |
Size | Dimensions: 25-210 x 65-510 , 10mm - 410mm |
Country of Origin | Made in India |
The Ohns Steel Material is required for master tools, gauges as well as dies. To simplify, the Ohns Rod is used in applications which stresses the importance that the size of the component not be changed once it has been hardened after being machined in an annealed condition. Hence, this OHNS High Speed Steel Bar is supplied in an annealed condition. Speaking about the characteristics of the alloy, the OHNS Bright Bar exhibits good durability, while offering excellent wear resistance properties and holds a good cutting edge.
With these properties, this tool grade OHNS Bar 1.2510 is regarded to be an excellent general purpose alloy. Therefore, the DIN 1.2510 Round bar is often used where the expense of a high carbon high chromium tool steel is an alloy grade that would not be justified. Following a proper annealing procedure will result in the OHNS Steel Flat Bar inheriting a maximum hardness value of 212 HBW.
Heat Treatment Of OHNS Round Bar
Soft Annealing °C | 750-780 |
Cooling | Furnace |
Hardness HB | max. 230 |
Stress-relief Annealing °C | approx. 650 |
Hardening °C | 780-820 |
Quenching | Air, Oil, Salt Bath 180-220°C |
Hardness after quenching HRC | 65 |
OHNS Round Bar Chemical Composition
C | Si | Mn | P | S | Cr | W |
0.85-1.00 | 0.15-0.35 | 1.00-1.20 | 0.030max | 0.030max | 0.50-0.70 | 0.50-0.70 |
OHNS Round Bar Equivalent Grades
STANDARDS | 100MnCrW4 | O1 | DIN 2510 | AISI O1 | AFNOR 90MWCV5 | JIS SKS3 |
Product Details:
Minimum Order Quantity | 50 Unit |
Material Grade | SS347 |
Brand | Riton Metal |
Usage/Application | Construction |
Shape | Round |
Single Piece Length | 36 meter |
Finish | Polished |
Material | Stainless Steel |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 50 Unit |
Material Grade | SS317L |
Brand | Riton Metal |
Shape | Round |
Usage/Application | Construction |
Single Piece Length | 18 meter |
Finish | Polished |
Material | Stainless Steel |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 50 Kg |
Thickness/Diameter | Size: 1/2 |
Material Grade | STAINLESS STEEL 304L ROUND BAR |
Single Piece Length | 6 meter, 18 meter, 3 meter, 12 Random Lengths Long Bars: 15-20 Random Lengths |
Usage/Application | Manufacturing |
Finish | Polished, Unpolished |
Shape | Round |
Size | 3mm to 800mm diameter |
Brand | Riton Metal |
Surface Finishing | Rough, BA Finish, Polished, NO.4 Finish, Black, Matt Finish, Bright, Turned |
Test Certificate | EN 10204 3.1 TEST CERTIFICATES |
Material | STAINLESS STEEL 304L ROUND BAR |
Tolerance | K12, H11, H13, K11, H8, K9, H9, H10, H12, K10 |
Country of Origin | Made in India |
The chemical composition of grade Stainless Steel 304l Round Bar is outlined in the following table
C | Mn | Si | P | S | Cr | Ni | N | |
---|---|---|---|---|---|---|---|---|
304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
304L | 0.03max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 12.0 | 0.10 max |
304H | min: 18.0 max:20.0 | min: 8.0 max: 10.5 | min: 0.04 max:0.10 | 0.75 max | 2.0 max | 0.045 max | 0.03 max | 0.10 max |
The mechanical properties of grade 304l Round Bar are displayed in the following table.
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
304lH also has a requirement for a grain size of ASTM No 7 or coarser. |
Physical properties of 304l stainless steel Round Bar in the annealed condition
Grade | Density(kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
304l/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |